Ball type slip shaft:
1. Can be composed of central pressure type, pneumatic side pressure type, mechanical side pressure type high-performance slip shaft, the narrowest cutting coil material, large weight bearing, strong adaptability.
2. Slip shaft with easy loading ring.
3. Large axle diameter = high strength + low deviation shaft steel has excellent performance.
4.3-inch main body outer diameter 75.5mm, action diameter 77.8mm, suitable for paper tube inner diameter 76.2mm, standard width 25mm, can be customized according to customer requirements.
5. Mainly used in adhesive tape, protective film, optical film and other products with narrow cutting width requirements.
Universal slip shaft:
1. The standard slip shaft is used to clamp the tube core with a mechanical convex key, which is fed by air pressure itself, and pushes every torque with the internal tension
The unit expands outwards, and then sets the sliding torque value of each torque group according to the inflation pressure, which is convenient for the condition dividing line and the time when each roll of material is rolled up Tension, so that each slip ring can solve the unwinding phenomenon caused by the uneven thickness and tension of the drinking material, so that it can be averaged.
2. According to customer needs, professional evaluation and design and manufacture, production of special specifications and special tension, special surface treatment.
3. All kinds of special environment (dust-free, corrosive, high temperature environment) can be applied.
4. The main outer diameter of the slip shaft is 75.5mm, the operation diameter is 77.8mm, which is suitable for the inner diameter of the paper tube is 76.2mm, and the standard width is 50mm.
5. The slip shaft belongs to medium and low tension, and each slip ring has bearings at both ends, mainly used in products with wide cutting materials.
Toshin slip shaft:
1. Central pressure slip shaft, pneumatic locking, pneumatic slip. High precision, high performance, accurate torque, precise control of tension over a wide range.
2. Suitable for fully automatic loading and unloading of coil slip shaft, to ensure that the coil core is not shifted and not loose during positive and negative rotation.
3.3-inch main body outer diameter 75.5mm, action diameter 77.8mm, suitable for paper tube inner diameter 76.2mm, standard width 50mm.
4. The slip shaft is a large tension slip shaft, which is mainly used in products with relatively large thickness such as sheets.
Low tension friction air shaft:
1. The low tension pneumatic slip shaft is based on the principle of air compression, so that the device is inflated inside the shaft to cause expansion of the top block, and the two air inlets push each torque unit outward expansion, and set each torque according to the size of the inflation pressure, which is suitable for PE elastic film material.
2. According to customer needs, professional evaluation and design and manufacture, production of special specifications and special tension, special surface treatment.
3. All kinds of special environment (dust-free, corrosive, high temperature environment) can be applied.
Nishimura differential air shaft:
1. Central pressure slip shaft, pneumatic locking, pneumatic slip. High precision, high performance, accurate torque, precise control of tension over a wide range.
2. Suitable for fully automatic loading and unloading of coil slip shaft, to ensure that the coil core is not shifted and not loose during positive and negative rotation.
3. Suitable for short shaft use, when winding metal foil, copper foil, aluminum foil, it shows its excellent performance. Nishimura’s special form: can also achieve very low friction tension, applied to the thinnest (10U) pet film, electronic film slitting.
4. The main outer diameter of the slip shaft is 75.5mm, the operation diameter is 77.8mm, which is suitable for the inner diameter of the standard paper tube is 76.2mm, and the width of the slip ring is 30mm, 40mm,45mm.
5. Nishimura slip shaft is mainly used in the lithium battery industry of diaphragm, pole plate and other tension requirements are very low slitting and winding.
6. The Ximun slip shaft is divided into two types: single air slip shaft and double air slip shaft. One way of the double air slip shaft is to control the tightening of the paper tube, and the other way is to control and adjust the tension.
A Nishimura type slip shaft comprises an axis for connecting with an external high-pressure air source and a plurality of slip rings arranged on the axis. The shaft is provided with injection holes corresponding to a number of slip rings. Each slip ring comprises a cavity, a base, a plurality of ejector plugs arranged between the cavity and the base, a plurality of ejector members and an elastic member. Each cavity is provided with an air injection slot communicated with the corresponding air injection hole and a plurality of receiving cavities communicated with the air injection slot. A plurality of receptions are opposite to the base, and a plurality of top plugs are glided in a plurality of receptions in a one-to-one correspondence. The outer surface of the base is concave inward to form a plurality of receptions. The elastic part is arranged around the periphery of the outer surface of the base and a plurality of top plugs are fixed in the corresponding receptions. The jacking part of the utility model is an oblique wedge, and the elastic part is directly arranged on the outer surface of the jacking part, so that the jacking part can provide the restoring force while fixing the jacking part.
No comment