Aluminum guide roller, also known as aluminum alloy guide roller, is through the selection of high-quality aluminum alloy material (6063-T5), the mold into a tube type (from the outer diameter of 30mm ~ 220mm) various specifications, there are reinforced structure, high strength.
Aluminum guide roller surface treatment features:
A. Ordinary anodizing (natural or white) surface hardness HV300
B. High hardness anodizing (brown) surface hardness HV700
C. Sandblasting (20 mesh \60 mesh \80 mesh \120 mesh) ordinary or hard oxidation
D. Teflon Teflon(green or black) surface hardness HV700
E. Knurled (pitch according to drawing requirements)
F. Groove roller, cooling roller, etc. are produced according to the requirements of the drawing
G. Dynamic balance G2.5 (within 3g), G6.3 (within 10g)
Aluminum guide roller application scope:
The guide roller has high strength, low resistance, light weight, flexible rotation, no rust, wear resistance and corrosion resistance, especially suitable for printing, packaging, plastics, electronic batteries and other precision machinery industries and various coil processing industries.
Aluminum guide roller is made of high quality aluminum, through advanced processing technology, the surface is anodized HV300 (white) or HV700 (brown), the roller body finish is 0.8; Calibration dynamic balance G2.5 level;
Aluminum pipe generally 8-10 reinforcement bars; Can be customized according to customer requirements groove roller, cross line aluminum guide roller, center open line aluminum guide roller, flower roller, mesh roller, cooling roller.
Aluminum alloy Aluminum guide rod HV300, HV700 series. The roller is extruded by high quality aluminum alloy, with nine built-in reinforcing bars and a wall thickness of 5cm. The wheel face adopts new technology and anodized treatment.
To ensure its rigidity, wear resistance, the introduction of advanced Akshi computer balance, correction, so that its balance up to 2g, the above technology is currently the first domestic. Use special cutting tools and measuring tools imported from Taiwan to make the roller
The surface roughness is 0.8, the coaxiality is 0.02mm, and the reasonable connection mode of the shaft head can easily operate at any operating speed. This product has high strength, low resistance, corrosion resistance,
Light weight, smooth rotation, no rust characteristics. It is a fine printing machine system.
Aluminum alloy guide roller has the advantages of high unit strength, light weight, small inertia, bright surface and no rust, etc. It is widely used in embossing printing, coating, coiling, blowing film, laminating, coating, slitting, papermaking, etc.
Textile and other production lines. The aluminum alloy guide roller produced by Junzheng goes through the most stringent raw material extrusion production process, and the special section and reinforcement of high strength can greatly improve the rigidity of the aluminum tube
The surface finishing of the CNC lathe can make the product obtain the highest combination strength and accuracy, good straightness and concentricity, and the precise high-speed dynamic balancing system can ensure the static balance and high-speed dynamic balancing performance
(can reach the ISO1940 G1 level), to ensure that the aluminum roll in the machine high-speed operation does not produce vibration, and different surface treatment can provide different needs, aluminum rolls produced by Guangsi machinery can be greatly increased
Improve the performance of your machine.
No comment